Using technology:

1: clean the surface will be sticky or coated with the surface clean and remove rust, dust and oil etc..

2, sizing: unscrew the hose (or cut open) blocks, glue onto the surface has been cleaned, the uniform distribution can be.

3, curing: will be adhered to good or sealed parts in the air to let the natural curing. Curing process is a from the surface to the internal curing process and in 24 hours (55% at room temperature and relative humidity) adhesive cured 2 ~ 4mm depth, if applied to the deep location of glue, especially not easy to come into contact with air site, completely curing time will be extended, if the temperature is relatively low, curing time will be extended, 6mm thick sealant to be fully cured more than 7 days time.